Tesla has initiated another minor design revision, this time improving the rear camera on the Model 3 and Model Y. This minor revision adds a protective lip around the camera, providing better shielding against rain, dirt, snow, and general road grime.
The design revision began rolling out for Model Y vehicles from Shanghai first, with the initial vehicles spotted with the revision dated as early as late September 2024. Tesla regularly makes minor design revisions on its vehicles in between model years, in an iterative design process that gradually improves as more and more vehicles are built.
Design Revision
The design revision adds a small shield around the rear camera, including a small lip towards the bottom end. The little lip is likely going to make the biggest difference, as it will help prevent kickback and wash from the tires landing on the camera lens, which can obscure it.
For now, nothing indicates a potential revision including a camera washer—similar to the Cybertruck’s front camera washer. However, given we already know the Model Y Juniper is likely arriving with a front camera, it’ll probably also have a front camera washer.
This lip for the rear camera should be a nice addition, but we’ll have to see just how much of an improvement it provides in the upcoming winter season as the messy, slushy mix arrives in much of the United States and Canada.
3D Printed Accessory
If you’re feeling left out without the new rear camera shield, you’ll soon be able to 3D print and install a similar design. Some entrepreneurial 3D modelers have already started working on making a retrofittable shield for both the HW3 and HW4 rear cameras.
In the meantime, we recommend using ceramic coating on the rear camera to help keep that slush and grime moving when it does hit the camera. A good application of ceramic coating can help prevent buildup on the lens.
Model S and X
For now, we haven’t seen this design revision on more recent Model S and Model X vehicles yet. There were previously rumors of a light refresh for both of the more premium vehicles. However, we haven’t seen any indications of these changes actually seeing the light of day.
Once the refreshes for these two vehicles arrive, we could see more drastic changes. Tesla has also indicated it is waiting to use some of its upcoming new battery cell technology in 2026, so we could be waiting for a while before seeing further updates to the Model S and Model X.
We’ll be looking for both vehicles to receive this design revision. If you spot them, let us know on social media or on our forums.
